v
If your system and EMX0 PCIe3 expansion drawer are in separate racks, use the 10-meter cables.
v
If you have a 9080-MHE, 9080-MME, 9119-MHE, or 9119-MME system and the EMX0 PCIe3
expansion drawer is in a separate rack, you might need to use the 20-meter cables.
2.
If the system has a rear cover, remove or open it.
3.
Ensure that you have the electrostatic discharge (ESD) wrist strap attached. If not, attach it now.
4.
Carefully remove the expansion drawer cable from the packaging. Do not remove the protective
covers now.
5.
Select from the following options:
v
If you are connecting the EMX0 PCIe3 expansion drawer to a 9080-MHE, 9080-MME, 9119-MHE,
or 9119-MME system, you will need to label the cables. Continue with step 6.
v
If you are not connecting the EMX0 PCIe3 expansion drawer to a 9080-MHE, 9080-MME,
9119-MHE, or 9119-MME system, continue with step 13 on page 20.
6.
Locate the following items that you need later in the procedure:
v
Expansion drawer cable pairs
v
Host system label sheet
v
EMX0 PCIe3 expansion drawer label sheet
v
Optional: Labeling diagram
7.
Attach the host system location labels to the expansion drawer cable.
Note:
While you are completing these steps, refer to Figure 15 on page 19 as a reference.
a.
Locate the host system (A) that you are attaching to the EMX0 PCIe3 expansion drawer.
b.
Locate the host system serial number label sheet (B).
c.
Match the host system serial number (C) to the serial number shown on the host system label
sheet.
d.
Determine the location of the PCIe3 cable adapter on the host system where you will attach the
first expansion drawer cable pair.
e.
Locate the labels on the host system label sheet (B) that correspond to the location of the PCIe3
cable adapter on the host system.
f.
Select one of the expansion drawer cables as the top cable (D) to attach to port T1.
g.
Attach the leftmost Cx-T1 label to the connector end of the cable (E). See Figure 15 on page 19.
Wrap the label with the blank end first so that the location information (F) is visible.
h.
Take the second label Cx-T1 from the host system label sheet (B) and place it on the opposite end
of the cable that attaches to the EMX0 PCIe3 expansion drawer. Ensure that the label is placed
more than 100 mm (4 in) from the end of the cable (G). See Figure 15 on page 19.
18
Power Systems: Installing the EMX0 PCIe Gen3 I/O expansion drawer
Содержание EMX0 PCIe3
