c.
Connect the other ends of the power cables into the power supplies on the EMX0 PCIe3 expansion
drawer you are installing. See Figure 20.
3.
Record the current date and time. You will need it when you power on the system when you are
checking for serviceable events.
4.
To power on the system to firmware standby state and check for serviceable events, select one of the
following options:
v
If your system is managed by an HMC, choose from the following options:
– If you are using an HMC Classic or HMC Enhanced interface, continue with step 5.
– If you are using an HMC En Tech Preview (Pre-GA) or HMC E interface,
continue with step 6 on page 27.
v
If your system is managed by an Advanced System Management Interface (ASMI), access the ASMI
by using an authority level of administrator or authorized service provider, and then continue with
step 7 on page 27.
5.
If you are using an HMC Classic or HMC Enhanced interface, complete the following steps:
a.
In the HMC navigation area, expand Systems Management and click Servers.
b.
Select the check box next to the name of the system to enable the tasks for that system.
c.
To enable the system to power on to the firmware standby state, complete the following steps:
1)
From the Tasks menu, click Properties.
2)
Click the Power-On Parameters tab.
3)
Record the current setting for the Partition start policy field so that you can restore the setting
later in this procedure.
4)
Set the Partition start policy field to User-Initiated. Click OK.
d.
From the Tasks menu, click Operations > Power on. Click OK.
e.
In the content area, observe the system that you are working with until the value in the Status
column changes to Standby.
f.
To reset the Partition start policy field to its original value, complete the following steps:
Figure 20. Routing the power cables through the s-carabiner and connecting them to the power supply
26
Power Systems: Installing the EMX0 PCIe Gen3 I/O expansion drawer
Содержание EMX0 PCIe3
