IBM BladeCenter T Type 8720, Инструкция по установке и эксплуатации

Страница: 39 / 128

Chapter 3. Removing and installing BladeCenter T modules
and options
This chapter provides instructions for removing and installing modules, options, and
blade servers in the BladeCenter T unit.
Each module is keyed so that it can be inserted only in an appropriate bay. For
example, you can insert an I/O module only in an I/O-module bay.
This section describes the following BladeCenter T modules and options and how to
remove and install them:
v
Bezel assembly
v Power module
v
Media tray
v Management module
v
Blower module
v KVM module
v LAN module
v I/O modules
v Blade server
See the“Rear view” on page 55 and “Front view” on page 51 for the location of
each module. These modules supply common functions to the blade servers that
are installed in the blade bays at the front of the BladeCenter T unit.
The KVM module and media tray supply I/O (CD-ROM drive, USB ports, keyboard,
video, and mouse) that is available to all the blade servers, selected by any one
blade server at a time.
Attention: To help ensure proper cooling, performance, and system reliability,
make sure that each of the module bays on the front and rear of the BladeCenter T
unit has a module or filler module installed. When replacing components, do not
operate the BladeCenter T unit for more than the following time limits:
v 1 minute without either a module or a filler module installed in each module bay
v
20 minutes without a server blade or blade filler
© Copyright IBM Corp. 2004
25