IBM @Server pSeries 630 6C4, Руководство по обслуживанию

Страница: 549 / 651

Chapter 11. SRNs for Linux
The x in the following group of SRNs is encoded as follows:
8 4 2 1
| | | |
| | | Replace all FRUs listed
| | Hot swap supported
| Software might be the cause
Reserved
Note: Some SRNs in this chapter may have 4 rather than 3 digits after the dash (-).
Use the physical location codes and FRU numbers listed on the diagnostics Problem Report
Screen.Failing Function Codes (FFCs) are not used in this group of SRNs. For more detailed information
refer to “MAP 1230: Linux Platform Error Problem Resolution” on page 80.
Service
Request
Number
Description and Action
651-88x The CEC or SPCN reported an error. Action: Refer to the entry MAP in this system unit’s
system service guide, with the 8 digit error and location codes, for the necessary repair
action. If the 8 digit error and location codes were NOT reported, then call support.
651-89x The CEC or SPCN reported an error. Action: Refer to the entry MAP in this system unit’s
system service guide, with the 8 digit error and location codes, for the necessary repair
action. If the 8 digit error and location codes were NOT reported, then call support.
652-88x The CEC or SPCN reported a non-critical error. Action: Schedule deferred maintenance.
Refer to the entry MAP in this system unit’s system service guide, with the 8 digit error and
location codes, for the necessary repair action. If the 8 digit error and location codes were
NOT reported, then call support.
652-89x The CEC or SPCN reported a non-critical error. Action: Schedule deferred maintenance.
Refer to the entry MAP in this system unit’s system service guide, with the 8 digit error and
location codes, for the necessary repair action. If the 8 digit error and location codes were
NOT reported, then call support.
A00-FF0 Description: Error log analysis is unable to determine the error. The error log indicates the
following physical FRU locations as the probable causes. Action: Use “MAP 1230: Linux
Platform Error Problem Resolution” on page 80.
A01-00x Description: Error log analysis indicates an error detected by the CPU, but the failure could
not be isolated. Action: Use “MAP 1230: Linux Platform Error Problem Resolution” on
page 80.
A01-01x Description: CPU internal error. Action: Use “MAP 1230: Linux Platform Error Problem
Resolution” on page 80.
A01-02x Description: CPU internal cache or cache controller error. Action: Use “MAP 1230: Linux
Platform Error Problem Resolution” on page 80.
A01-03x Description: External cache parity or multi-bit ECC error. Action: Use “MAP 1230: Linux
Platform Error Problem Resolution” on page 80.
A01-04x Description: External cache ECC single-bit error. Action: Use “MAP 1230: Linux Platform
Error Problem Resolution” on page 80.
A01-05x Description: System bus time-out error. Action: Use “MAP 1230: Linux Platform Error
Problem Resolution” on page 80.
A01-06x Description: Time-out error waiting for I/O. Action: Use “MAP 1230: Linux Platform Error
Problem Resolution” on page 80.
A01-07x Description: System bus parity error. Action: Use “MAP 1230: Linux Platform Error Problem
Resolution” on page 80.
529