IBM Aptiva 2198, Справочное руководство

Страница: 77 / 186

6. Using a damp cloth, wipe the outside of the mouse and the retainer. Be
sure to wipe the rollers inside the mouse.
7. Insert the ball and retainer. Lock the retainer by rotating it so the arrow
is aligned with the lock symbol.
8. Reconnect the mouse cable to the computer.
Moving your computer
Take the following precautions before moving your computer.
1. Back up all files and data from the hard disk.
Operating systems can vary in the way they perform backup
procedures. Refer to your operating system documentation for
information about software backup.
2. Remove all media (diskettes, compact discs, tapes, and so on) from the
drives.
3. Turn off the computer and all attached devices. Your hard disk drive
automatically parks the read/write heads in a nondata area. This
process prevents damage to the hard disk.
4. Unplug the power cords from electrical outlets.
5. Disconnect communication cables, such as modem or network cables,
from the outlets first, and then disconnect the other ends of cables from
the computer.
6. Note where any remaining cables are attached to the rear of the
computer; then remove them.
7. If you saved the original shipping cartons and packing materials, use
them to pack the units. If you are using different cartons, cushion the
units to avoid damage.
Chapter 6. Taking care of your computer
55