IBM Aptiva 2198, Справочное руководство

Страница: 41 / 186

4. Click the Advanced tab.
5. In the Power buttons area, locate the When I press the power button
on my computer field, select either Shutdown or Standby, and then
click OK.
After making the necessary setting change, you can use the power button to
have the computer enter Standby mode if you press the button for less than
four seconds while the computer is on. To bring the system out of Standby
mode, press any key on the keyboard or move the mouse. An incoming
modem ring while the system is in Standby mode also wakes the system up.
Take note of the following when using Standby feature.
Ÿ
When the system is in normal on state:
– Pressing the power button for more than four seconds turns off the
system power. It does not force Windows 98 to perform an orderly
shutdown routine.
– Pressing the power button for less than four seconds puts the
system into Standby mode.
– Any use of the keyboard or mouse, or an incoming modem ring,
wakes up the system from Standby mode and puts it in the normal
on state.
Ÿ
When the computer is in the
normal off state, pressing the power button,
regardless of the length of time you hold it in (less than or more than
four seconds), simply starts the computer.
Using other power-management features in Windows
98
You can also set a duration of inactivity that must elapse before the
computer system, monitor, or hard disk automatically enter a standby state.
To do so:
1. From the Windows desktop, click the Start button.
2. Select Settings; then, click Control Panel.
3. Double-click the Power Management icon. The Power Management
Properties window opens.
4. From the Power Schemes tab, you can:
Ÿ
Select an existing power scheme with preset durations.
Ÿ
Modify an existing power scheme by changing the preset durations.
Ÿ
Create a new power scheme with custom durations.
5. After making the changes, click OK.
Chapter 2. Operating your computer
19