IBM 86803RU - Netfinity 7000 M10, Руководство по техническому обслуживанию аппаратной части

Страница: 78 / 278

Establishing a Direct Connection to the
Netfinity Advanced System Management
PCI Adapte:
You can establish a direct connection to
the Netfinity Advanced System Management PCI Adapter
in one of three ways:
Ÿ
Connect using a serial connection and a terminal
program
Ÿ
Connect using a TCPIP network connection and a
TELNET session
Ÿ
Connect using a TCPIP network connection and a
web browser
Using a Terminal Program to Connect:
To use a
terminal program to establish a connection with the
system management subsystem:
1. Use a terminal program to establish a connection with
the system management subsystem modem.
Use the following modem settings:
Baud
57.6 k
Data Bits 8
Parity None
Stop Bits 1
Flow Control Hardware
2. Dial the Netfinity Advanced System Management PCI
Adapte.
3. Log in to the system management subsystem.
When you have established a connection with the
system management subsystem, you will be
prompted for a username and password. You must
provide a username and password combination that
has been previously configured for use with the
system management subsystem.
You can use one of two username and password
combinations:
Ÿ
The default username (USERID) and password
(PASSW0RD)
Note
The default username and password are
case sensitive. You must use all caps, and
the “0” in PASSW0RD is the numeral zero.
Ÿ
A username and password that you define using
the Advanced System Management service and
Netfinity Manager
70
Netfinity Server HMM