IBM 86803RU - Netfinity 7000 M10, Руководство по техническому обслуживанию аппаратной части

Страница: 57 / 278

Notes
1. Be sure to check the System Management
Processor check box in the Netfinity Serial
Connection Control window when you create the
Serial Connection Control entry. If this check box
is not checked, the connection with the remote
system management subsystem will fail. A null
modem connection does not require that this box
be checked.
2. When using Serial Connection Control to
configure a Dialout Entry for use by the
Advanced System Management service, be sure
to enter the Login ID and Password for access to
the remote system's system management
subsystem, not the User ID and Password for
access to Netfinity services on the remote
system.
3. When creating a Serial Connection Control entry
to establish a null modem connection to a remote
system's Advanced System Management Adapter
or controller, make sure that the Port Baud Rate
value (configured using the Serial Connection
Control service) is set to match the Baud Rate
value (configured using the Advanced System
Management service) of the target system. If the
Port Baud Rate and the Baud Rate values do
not match, the connection will fail.
Configuration Information:
The Configuration
Information window (shown in Figure 1) contains detailed
information about the system management subsystem,
including RAM microcode, ROM microcode, and
device-driver information.
C o n f i g u r a t i o n I n f o r m a t i o n - S P N U L L m o d e m
S e r v i c e P r o c e s s o r V i t a l P r o d u c t I n f o r m a t i o n
R O M F i r m w a r e
H a r d w a r e R e v i s i o n : 2 4 4
D e v i c e D r i v e r Ve r s i o n : 1 . 0 O S 2
R e v i s i o n : 1
P a r t N u m b e r : 7 6 H 6 1 3 0
F i l e N a m e : $ 8 0 C 5 1 0 2 . B I N
D a t e : 0 9 - 0 9 - 9 6
C h e c k S u m : 0
R e v i s i o n : 1 0
P a r t N u m b e r : 7 6 H 6 8 4 8
F i l e N a m e : $ 8 0 C 5 1 0 2 . B I N
D a t e : 0 8 - 1 3 - 9 7
C h e c k S u m : 8 0
R A M F i r m w a r e
C a n c e l H e l p
Figure 1. The Configuration Information window
Netfinity 7000-M10 - Type 8680
49