IBM 86803RU - Netfinity 7000 M10, Руководство по техническому обслуживанию аппаратной части

Страница: 79 / 278

Important
For security purposes, change the username and
password using the Advanced System
Management service. For more information, see
“Configuration Settings” on page 50.
If you update the system management
subsystem microcode, the default username
(USERID) and password (PASSW0RD) are reset.
If you had previously changed them, you will
need to change them again.
When you have logged in, you will be presented with the
Netfinity Advanced System Management PCI Adapter
menu system. For more information, see “Netfinity
Advanced System Management PCI Adapter Menus” on
page 73
Using a TELNET Session to Connect:
To use a
TELNET session to establish a connection with the
system management subsystem:
1. TELNET to the TCPIP address that has been
assigned to the Netfinity Advanced System
Management PCI Adapter.
2. Log in to the system management subsystem.
When you have established a connection with the
system management subsystem, you will be
prompted for a username and password. You must
provide a username and password combination that
has been previously configured for use with the
system management subsystem.
You can use one of two username and password
combinations:
Ÿ
The default username (USERID) and password
(PASSW0RD)
Note
The default username and password are
case sensitive. You must use all caps, and
the “0” in PASSW0RD is the numeral zero.
Ÿ
A username and password that you define using
the Advanced System Management service and
Netfinity Manager
Netfinity 7000-M10 - Type 8680
71