IBM 86803RU - Netfinity 7000 M10, Руководство по техническому обслуживанию аппаратной части

Страница: 207 / 278

Error Code/Symptom FRU/Action
1600
(The System Management
Card is not functioning)
Do the following before
replacing a FRU:
Ÿ
Remove the AC power
to the system, wait 20
seconds; then,
re-connect the AC
power. Wait 30
seconds; then,
power-on the system.
1. I/O Board Cable
2. System Management
Card Cable
3. System Management
Card
4. I/O Function Card
5. I/O Board
1762
(Fixed Disk Configuration
error) 1. Fixed Disk Cables
2. Run
Configuration/Setup
3. Fixed Disk Adapter
4. Fixed Disk Drive
5. I/O Function Card
178X
(Fixed Disk error) 1. Fixed Disk Cables
2. Run Diagnostics
3. Fixed Disk Adapter
4. Fixed Disk Drive
5. I/O Function Card
1962
(Drive does not contain a
valid boot sector) 1. Verify a bootable
operating system is
installed
2. Run Diagnostics
3. Hard Disk Drive Cable
4. I/O Function Card
5. Hard Disk Drive
2400
(Video controller test failure) 1. Video Adapter
(if installed)
2. I/O Function Card
2462
(Video memory
configuration error) 1. Video Adapter
(if installed)
2. I/O Function Card
5962
(IDE CD-ROM configuration
error) 1. Run Configuration
2. CD-ROM Drive Cable
3. CD-ROM Drive
4. Battery, see “Battery”
on page 89.
5. I/O Board
8603
(Pointing Device Error) 1. Pointing Device
2. I/O Function Card
0001200
(Machine check architecture
error) 1. BSP Processor
2. Processor Board
000120PX
(Processor cache error) 1. Processor X
2. Processor Board
00019501
(Processor 1 is not
functioning) 1. VRM 1A/1B
2. Processor 1
3. Processor Board
Netfinity 7000-M10 - Type 8680
199