IBM 86803RU - Netfinity 7000 M10, Руководство по техническому обслуживанию аппаратной части

Страница: 73 / 278

Notes
1. If you are using the Advanced System
Management service with an Netfinity Advanced
System Management PCI Adapter installed in a
Netfinity 7000 server, the event log might contain
entries that begin with the text “I2C Message.”
These messages are normal and are intended for
use by IBM servicers in the event of system
problems.
2. If you are using the Advanced System
Management service with a Netfinity 7000 server,
the event log will also include any POST error
messages.
The following functions are available from the Options
pulldown menu in the System Management Subsystem
Logs window:
Ÿ
Load
Refreshes the contents of the System Management
Subsystem Logs window.
Ÿ
Print to File
Saves the contents of the System Management
Subsystem Logs window to a text file.
Ÿ
Print to Printer
Sends the contents of the System Management
Subsystem Logs window to a printer attached to your
system.
Ÿ
Clear Log
Erases all entries that are currently stored in the
system management subsystem Event Log (including
any entries that are not currently visible in the System
Management Subsystem Log window).
Note
Once you use Clear Log to erase the entries in
the system management subsystem Event Log,
they are permanently erased and cannot be
retrieved.
Operational Parameters:
The Operational
Parameters window (see Figure 6 on page 66) shows the
current values or status of many system components
monitored by the system management subsystem.
Available values include:
Ÿ
Power supply voltages (inc5 V ac, +12 V ac,
-3.3 V ac, -12 V ac; Netfinity 7000 servers feature
additional -5 V ac and Voltage Regulation Module
[VRM] monitors).
Ÿ
Current temperatures and threshold levels for system
components such as far-end adapter, center adapter,
microprocessors, I/O board, and DASD backplane.
Netfinity 7000-M10 - Type 8680
65