IBM 866441Y - Netfinity 5600 - 8664, Руководство по техническому обслуживанию аппаратной части

Страница: 87 / 276

Important
For security purposes, change the user name
and password using the Netfinity Advanced
System Management processor.
If you update the Netfinity Advanced System
Management processor microcode, the default
user name (USERID) and password
(PASSW0RD) are reset. If you had previously
changed them, you will need to change them
again.
When you have logged into the Netfinity Advanced
System Management processor, the following main
menu appears:
2 Monitors
3 Error Logs
4 Service Processor Configuration
5 System Services
6 System Power
7 Boot
B Remote Terminal Status
Y Disconnect Current Logon
Z Start Remote Video
3. Start (or restart) the server.
Ÿ
If the remote server is currently off:
a. Select 6 System Power from the main
menu.
b. Select 4 Power On from the System Power
menu.
Ÿ
If the server is currently turned on, you must
restart the server. You can use selections from
the System Power menu or the Boot menu to
restart the server in several ways.
To restart the server using System Power menu
selection:
a. Select 6 System Power from the main
menu.
b. Select 3 Power Off from the System Power
menu.
c. Once the server has powered off, select 4
Power On to restore power to the server.
To restart the server using Boot menu
selections:
a. Select 7 Boot from the main menu.
b. Select either 1 Reboot w/OS Shutdown or
2 Reboot immediately to restart the
server.
Netfinity 5600 - Type 8664
79