IBM 866441Y - Netfinity 5600 - 8664, Руководство по техническому обслуживанию аппаратной части

Страница: 48 / 276

5. Remove the device or adapter. Some configurations
are not supported. If you must remove an adapter,
see “Working with adapters” on page 107.
Resolving software configuration conflicts:
The memory-address space and IRQs used by some
hardware options might conflict with addresses defined for
use through application programs or the expanded memory
specification (EMS). (EMS is used only with DOS.)
If a conflict exists, one or more of the following conditions
might exist:
Ÿ
The system cannot load the operating system.
Ÿ
The system does not work.
Ÿ
An application program does not operate, or it returns
an error.
Ÿ
Screen messages indicate a conflict exists.
To resolve conflicts, you can change the software or
hardware configuration.
Note
Start the System Configuration Utility program to view
the addresses used by the server functions. (See
“The System Configuration Utility program” on
page 25 for instructions.)
The best way to resolve memory-address conflicts is to
change the addresses used by the application program or
the device driver. You can use the System Configuration
Utility program to change addresses.
If a device driver is causing a memory-address conflict,
refer to the operating-system documentation or the
documentation that comes with the device drivers.
40
Netfinity Server HMM