IBM 866441Y - Netfinity 5600 - 8664, Руководство по техническому обслуживанию аппаратной части

Страница: 108 / 276

Preparing to install options
Before you begin:
Read “Safety information” on page 230.
Note
You do not need to turn off the server to work with
hot-plug or hot-swap devices, such as hot-plug PCI
adapters, hot-swap hard disk drives, hot-swap power
supplies, and hot-swap fans.
If you are:
Ÿ
Installing or removing a hot-plug PCI adapter, go to
“Working with adapters” on page 107.
Ÿ
Installing or replacing a hot-swap hard disk drive, go
to “Installing internal drives” on page 124.
Ÿ
Installing or replacing a hot-swap power supply, go to
“Installing a hot-swap power supply” on page 135.
Ÿ
Removing a hot-swap power supply, go to “Removing
a hot-swap power supply” on page 137.
Ÿ
Replacing a hot-swap fan, go to “Replacing a
hot-swap fan assembly” on page 139.
Ÿ
Installing or removing an option not listed in the
preceding list, continue with the following steps.
1. Unlock and open the server door.
Caution
If the device has doors, be sure to remove or
secure the doors before moving or lifting the
device to avoid personal injury. The doors will
not support the weight of the device.
2. Remove all media (diskettes, CDs, optical discs, or
tapes) from the drives; then, turn off the server and all
attached options.
100
Netfinity Server HMM