IBM 866441Y - Netfinity 5600 - 8664, Руководство по техническому обслуживанию аппаратной части

Страница: 177 / 276

System board/backplane assembly
removal
Before you begin:
Read “Safety information” on page 230.
Note
1. The illustrations in this book are similar to your
server; details might vary.
2. To replace the system board/backplate assembly,
reverse this procedure.
To remove the system board/backplate assembly, do the
following.
1. Power-off the server and all external devices; then,
disconnect the server from the power source.
2. Remove the server cover. See “Removing the
left-side cover (tower model)” on page 103 or
“Removing the cover (rack model)” on page 104.
3. Remove the processor board. See “Processor
board/backplate removal” on page 172.
4. Disconnect the system board/backplate assembly
cables.
5. While tilting the cable bracket
.1/
forward, slide the
system board/backplate assembly latch
.2/
in the
direction shown. Then, remove the system
board/backplate assembly
.3/
out of the server.
Netfinity 5600 - Type 8664
169