IBM 866441Y - Netfinity 5600 - 8664, Руководство по техническому обслуживанию аппаратной части

Страница: 161 / 276

Installing a server in a rack enclosure
Use the following instructions for installing a server in a
rack.
The server comes with all the rack installation hardware
(rack model only). Review the preinstallation information in
“Preparing to install the server in a rack enclosure”; then,
continue with “Installing the rack model in a rack
enclosure.”
Caution
Do not place any object weighing more than 82 kg
(180 lbs.) on top of rack-mounted devices.
Installing the rack model in a rack
enclosure:
During this procedure, you must install
parts on the rack enclosure and the server. This process
can be divided in two parts:
Ÿ
Preparing the rack enclosure
Ÿ
Installing the server into the rack enclosure
Preparing to install the server in a rack
enclosure:
You will need the following items:
Ÿ
One rack mounting kit
– Two slide-rail assemblies
– One cable-management arm, including hitch pins
– One bag of screws and nuts
– Hook and loop fastener strips
– One installation template
– One packet of tie wraps
– Two wheel-shaped knobs
Ÿ
Flat-blade screwdriver
Ÿ
The documentation that comes with the rack
>
82 kg (180 lbs)
Netfinity 5600 - Type 8664
153