IBM 7199-92X, Инструкция по установке и эксплуатации

Страница: 62 / 82

Attention: Ensure that the gold connectors at the rear of the module do not
come into contact with your hands or with the packing material as you unpack
the replacement module. Avoid damaging the gold connectors against the
chassis as you insert the replacement module.
Attention: Ensure that the gold connectors at the rear of the module do not
come into contact with your hands or with the packing material as you unpack
the replacement module. Avoid damaging the gold connectors against the
chassis as you insert the replacement module.
4. Unpack the replacement module.
5. Carefully align the replacement module, and insert into the chassis until you
hear the release latch click in place.
6.
Plug in the power cord to the replaced module.
After replacing the module, you can verify that the new module is working.
v
The power supply module LED light on the rear of the chassis is not
illuminated.
v
The fault LED light on the front of the chassis is not amber.
After verifying that the replacement module is working, return the part to IBM.
For details, see “Returning an appliance or part” on page 36.
44
WebSphere DataPower XC10 Appliance: Type 7199-92X: Installation and User's Guide