IBM 7199-92X, Инструкция по установке и эксплуатации

Страница: 72 / 82

2. With a ballpoint pen, transcribe the machine type, model, and serial number of
the defective appliance to the RID tag.
3.
Secure the RID tag as close as possible to, but not covering, the serial number
of the replacement appliance. The original serial number of the replacement
appliance must be visible.
Figure 24 shows an example of the RID tag that is included in the box that
contains the replacement appliance.
The use of the Repair ID tag
customer inventory accuracy. is important for
The original serial number must be visible.
Place the Repair ID tag as close as
possible, but not covering, the machine
serial number of the replacement unit.
Transcribe the machine type,model, and
serial number of the failing unit to the
Repair ID tag for the replacement unit.
Verify that the machine serial number on
the failing unit matches the serial number
reported to IBM technical support.
A Repair ID tag maintains the original serial
number record of the machine and allows IBM
to entitle the machine for future maintenance
or warranty service. Mail in exchange requires
the completion and securing a Repair ID tag
(part number 19P5941) to the replacement
unit. Please be sure to use the following
procedures when replacing your unit:
USE BALLPOINT PEN TO
COMPLETE THE RID TAG.
1.
2.
-
-
-
-
ATTENTION:
IBM REPAIR IDENTIFICATION TAG
REPAIR ID TAG
MT
SN
PART NUMBER 19P5941
Figure 24. Example of the RID tag
54
WebSphere DataPower XC10 Appliance: Type 7199-92X: Installation and User's Guide