IBM 7199-92X страница 76 Скачать руководство пользователя | Manualshive

Страница: 76 / 82

background image

accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause
harmful interference, in which case the user will be required to correct the
interference at his own expense.

Properly shielded and grounded cables and connectors must be used in order to
meet FCC emission limits. IBM is not responsible for any radio or television
interference caused by using other than recommended cables and connectors or by
unauthorized changes or modifications to this equipment. Unauthorized changes
or modifications could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.

Industry Canada Compliance Statement

This Class A digital apparatus complies with Canadian ICES-003.

Avis de conformité à la réglementation d'Industrie Canada

Cet appareil numérique de la classe A est conforme á la norme NMB-003 du
Canada.

United Kingdom telecommunications safety requirement

Notice to Customers:

This apparatus is approved under approval number
NS/G/1234/J/100003 for indirect connection to public
telecommunication systems in the United Kingdom.

European Union EMC Directive conformance statement

This product is in conformity with the protection requirements of EU Council
Directive 2004/108/EC on the approximation of the laws of the Member States
relating to electromagnetic compatibility. IBM cannot accept responsibility for any
failure to satisfy the protection requirements resulting from a non-recommended
modification of the product, including the fitting of non-IBM option cards.

This product has been tested and found to comply with the limits for Class A
Information Technology Equipment according to CISPR 22/European Standard EN
55022. The limits for Class A equipment were derived for commercial and
industrial environments to provide reasonable protection against interference with
licensed communication equipment.

Attention:

This is a Class A product. In a domestic environment this product may

cause radio interference in which case the user may be required to take adequate
measures.

European Community contact:

IBM Technical Regulations
Pascalstr. 100, Stuttgart, Germany 70569
Telephone: 0049 (0)711 785 1176
Fax: 0049 (0)711 785 1283
Email: [email protected]

58

WebSphere DataPower XC10 Appliance: Type 7199-92X: Installation and User's Guide

«
...
74
75
76
77
78
...
»

Содержание 7199-92X



















































































Отзывы:

Нет отзывов

Похожие инструкции для 7199-92X

Бренд: Fencee Страницы: 36

Бренд: TDK-Lambda Страницы: 29

Бренд: SafetySpeed Страницы: 43

Бренд: Mean Well Страницы: 35

Бренд: Scheppach Страницы: 124

Бренд: H&H Страницы: 20

Бренд: Promac Страницы: 41

Бренд: TDK-Lambda Страницы: 11

Бренд: Napa Страницы: 12

Бренд: BBT Страницы: 18

Бренд: VOLTCRAFT Страницы: 8

Бренд: Xinpu Страницы: 13

Бренд: Senco Страницы: 2

Brilliant Tools BT160100

Бренд: KS Tools Страницы: 7

Бренд: F.F. Group Страницы: 64

Бренд: YATO Страницы: 2

Бренд: Sealey Страницы: 2

Бренд: VWR International Страницы: 174

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды