IBM 7199-92X, Инструкция по установке и эксплуатации

Страница: 23 / 82

Note: When you press the power button to turn off the appliance, electrical
current still flows to the device. To completely stop all electricity to the
appliance, unplug all power cords.
Network connectors
The front panel of each appliance has two LAN management Ethernet ports and
two Ethernet modules. See “Ethernet network configuration” on page 8 for a
description of the Ethernet naming convention.
LAN management Ethernet ports
The two system management Ethernet ports provide connection to the
LAN. These ports provide remote management access to the device and
cannot be used as data ports. The remaining Ethernet interfaces can handle
data traffic and logging functions to and from the various DataPower
services.
Best Practice: Use the
MGT0
or
MGT1
Ethernet interface for system-wide
management functions to handle network traffic for
incoming SNMP, SSH, and user interface functions on your
intranet.
MGT0
Ethernet connector
This Ethernet interface can manage all transaction data on the
appliance. The
MGT0
Ethernet connector also supports IPMI over
LAN, including serial over LAN.
MGT0
has an associated speed
LED and activity LED:
Speed LED (
A
)
v
The green LED indicates a 1 Gbps connection.
v
The amber LED indicates a 10 Mbps or 100 Mbps
connection.
Activity LED (
B
)
v
The green LED indicates the port is linked.
v
The green flashing LED indicates the port is active.
MGT1
Ethernet connector
This Ethernet interface can manage all transaction data on the
appliance.
MGT1
has an associated LED activity light and a LED
speed light:
Speed LED (
A
)
v
The green LED indicates a 1 Gbps connection.
v
The amber LED indicates a 10 Mbps or 100 Mbps
connection.
Activity LED (
B
)
A B
Figure 3. Ethernet port LEDs
Chapter 1. Introducing the IBM WebSphere DataPower XC10 Appliance
5