IBM 7199-92X, Инструкция по установке и эксплуатации

Страница: 71 / 82

4. Remove the end of the slide rails, as shown in Figure 23.
a. Push up the front tab
1
and slide out the front latch
2
.
b. Push in the lower pin
3
and lift up slightly on the front of the slide rail
4
.
c. Remove the slide rail from the rack.
Applying the repair identification tag
When you receive a replacement appliance, the box contains a repair identification
(RID) tag. The RID tag is important for transferring the serial number of the
defective appliance to the replacement appliance. The RID tag maintains the
original serial number record of the appliance and allows IBM to entitle the
appliance for future maintenance or warranty service. Replacement exchange
requires the completion and securing of the RID tag to the replacement appliance.
When replacing your appliance:
1.
Locate the defective appliance. The serial number of the defective appliance
should match the serial number that you reported to IBM.
Rack Rear
Figure 22. Lifting the rear of appliance off the rail
R
Rack Front
Figure 23. Removing the end of the slide rails
Chapter 7. Removing or replacing the appliance or parts
53