IBM 7199-92X, Инструкция по установке и эксплуатации

Страница: 36 / 82

To install the appliance on the slide rails, complete the following steps as shown in
Figure 10.
1.
Pull the slide rail forward and insert the two pins
1
on the front of the rail
into the two lower holes in the U on the front of the rack.
2. Use two people to carefully lift the appliance
2
and tilt it into position over
the slide rails so that the rear nail heads
3
on the appliance line up with the
rear slots
4
on the slide rails.
3. Slide the appliance down until the rear nail heads slip into the two rear slots,
and then slowly lower the front of the appliance
5
until the other nail heads
slip into the other slots on the slide rails.
4.
Make sure that the front latch
6
slides over the nail heads.
5. If the appliance is locked into place, slide the appliance toward you so that you
can attach the brackets with the captive screws.
6. Slide the appliance into the rack, as shown in Figure 11.
Lift point
Lift point
Figure 10. Secure the appliance in the rack
Figure 11. Slide the appliance into the rack
18
WebSphere DataPower XC10 Appliance: Type 7199-92X: Installation and User's Guide