IBM 1735R16, Инструкция по установке и эксплуатации

Страница: 61 / 71

54
RCM Installer and User Guide
7. From the main menu, type 2 to select Firmware Management. The current
version of your fi rmware displays on the Firmware Management menu.
8. From the Firmware Management menu, type 1 to select FLASH Download.
9. Type the name of the FLASH fi le and press Enter .
10. Confi rm the TFTP download by typing y or yes and pressing Enter .
11. The RCM will verify the fi le you downloaded is valid. Next you will be
prompted to confi rm the upgrade. Type y or yes and Enter .
12. The RCM will begin the FLASH upgrade process. On-screen indicators
will display the upgrade process. When the upload is complete, the RCM
will reset and upgrade the internal subsystems.
ATTENTION: Do not cycle power to the RCM during this process. A loss of power might
render the RCM inoperable and require the unit be returned to the factory for repair. Be
patient; an update can take as long as 10 minutes.
13. Once the upgrade is complete, the startup message from step 4 will appear
on the terminal screen.
Upgrading the CO firmware
The CO cables can be upgraded individually or simultaneously. When an
upgrade is initiated, you will see a progress bar. As long as an upgrade is in
progress, you cannot initiate another.
To simultaneously upgrade multiple CO cables:
1. Press Print Screen. The Main dialog box will appear.
2. Click Commands - CO Status . The CO Status dialog box appears.
Figure A.1: CO Status Dialog Box
3. Click one or more types of cables to upgrade. Click Upgrade .