IBM 1735R16, Инструкция по установке и эксплуатации

Страница: 42 / 71

Chapter 3: Analog Port Operation
35
Use the Security dialog box to lock your console with password protection, set
or change your password and enable the screen saver.
NOTE: If a password has been previously set, you will have to enter the password before you
can access the Security dialog box.
To access the Security dialog box:
1. Press Print Screen . The Main dialog box will appear.
2. Click Setup - Security . The Security dialog box appears.
Figure 3.10: Security Dialog Box
To set or change the password:
1. Single-click and press Enter or double-click in the New text box.
2. Type the new password in the New text box and press Enter . Passwords
may be up to 12 characters long and are case sensitive. Legal characters
are: A-Z, a-z, Ø-9, space and hyphen. A password must contain both alpha
and numeric characters.
3. In the Repeat box, type the password again and press Enter .
4. Click OK to just change your password, and then close the dialog box.
To password protect your console:
1. Set your password as described in the previous procedure.
2. Select Enable Screen Saver .
3. Type the number of minutes for Inactivity Time (from 1 to 99) to delay
activation of password protection and the screen saver feature.
4. For Mode, select Energy if your monitor is E
NERGY
S
TAR
compliant;
otherwise select Screen .