IBM 1735R16, Инструкция по установке и эксплуатации

Страница: 50 / 71

Chapter 3: Analog Port Operation
43
Click the checkbox next to the servers you wish to scan.
-or-
Double-click on a server’s name or port.
-or-
Press
Alt and the number of the server you wish to scan. You can select up
to 16 servers.
4. In the Scan Time box, type the number of seconds (from 3 to 99) of desired
time before the scan moves to the next server in the sequence.
5. Click OK .
To remove a server from the scan list:
1. In the Scan dialog box, deselect the checkbox next to a server to be removed.
-or-
Double-click on a server’s name or port.
-or-
Click the
Clear button to remove all servers from the scan list.
2. Click OK .
To start the scan mode:
1. If OSCAR is not open, press Print Screen. The Main dialog box will appear.
2. Click Commands . The Commands dialog box appears.
Figure 3.20: Commands Dialog Box
3. Select Scan Enable in the Commands dialog box.
4. Click X to close the Commands dialog box.
NOTE: Scanning will begin as soon as Scan Enable is checked.