IBM 1735R16, Инструкция по установке и эксплуатации

Страница: 47 / 71

40
RCM Installer and User Guide
Resetting Your PS/2 Keyboard and Mouse
If your PS/2 keyboard or mouse stops responding, you may be able to re-
establish operation of these peripherals by issuing a reset command. The reset
command sends a key sequence to the server which causes the mouse and
keyboard settings to be sent to the RCM. With communication re-established
between the server and the RCM, functionality is restored to the user.
NOTE: This function is for Microsoft Windows-based computers only. Resetting the PS/2 on a
computer running any other operating system may require that you restart that computer.
To reset the PS/2 mouse and keyboard values:
1. If OSCAR is not open, press Print Screen . The Main dialog box will appear.
2. Click Commands - Reset PS/2 . A message box displays requesting that
you confi rm the reset. Click OK .
a. A message appears indicating that the mouse and keyboard have
been reset.
b. Click X to close the message box.
-or-
Click
X or press Escape to exit without sending a reset command to
the PS/2 mouse and keyboard.
Displaying Version Information
You can view the RCM, KCO, UCO and CCO firmware versions. For optimum
performance, keep your firmware current. For more information, see Appendix A.
To display version information:
1. Press Print Screen . The Main dialog box will appear.
2. Click Commands - Display Versions . The Version dialog box appears. The
top half of the box lists the subsystem versions in the RCM.
Figure 3.15: Version Dialog Box