IBM 1735R16, Инструкция по установке и эксплуатации

Страница: 44 / 71

Chapter 3: Analog Port Operation
37
To exit the screen saver mode:
Press any key or move your mouse. The Main dialog box appears.
To turn off the screen saver:
1. In the Security dialog box, clear Enable Screen Saver .
2. Click OK .
To immediately turn on the screen saver:
Press Print Screen , then press Pause .
Viewing and Disconnecting Users
You can view and disconnect users through the User Status dialog box. The
user name (U) will always be displayed; however, you can display either the
server name or eID number to which a user is connected. If there is no user
currently connected to a channel, the user field will be blank and the server
field will display Free .
NOTE: The local user can be preempted (disconnected) by a digital user via the Virtual
Console software. See the Preempting the local user in the Virtual Console Software Installer
and User Guide for additional information.
To view current user connections:
1. Press Print Screen . The Main dialog box will appear.
2. Click Commands - User Status . The User Status dialog box appears.
To disconnect a user:
1. Press Print Screen . The Main dialog box will appear.
2. Click Commands - User Status . The User Status dialog box appears.
3. Click the letter of a user to disconnect. The Disconnect dialog box will appear.
Figure 3.11: User Status Dialog Box Figure 3.12: Disconnect Dialog Box