IBM 1735R16, Инструкция по установке и эксплуатации

Страница: 27 / 71

20
RCM Installer and User Guide
Figure 2.8: Cascaded Multi-user Legacy Switch Configuration
To connect the network and turn on your RCM:
1. Connect your network cable from the LAN port on the rear of the RCM to
your network.
2. The components in the RCM system can be turned on in any order. However,
since the CO cables are powered by the servers, turn on the servers first and
then turn on all attached RCMs and switches for the most efficient startup.
To install your NetBAY VC software:
See the NetBAY Virtual Console Software Installer and User Guide that ships
with your RCM system.
Analog
Workstation
Remote
Workstation
KCO Cable A
KCO Cable B
IBM NetBAY
2x8 Switch
KVM
Server 1
Server 2
Server 3
Second KCO connects
to user port on the front
of the switch