i3 International SRX PRO Скачать руководство пользователя страница 37

Страница: 37 / 220

Launch SRX-Pro Server software by double-clicking the Server icon on the Desktop.

4. Once the software loads, the following message will be displayed on the screen.

Click

(highly recommended) to format all storage drives and erase video data recorded in a different time zone.

5. Click

in the “All old data will be formatted” warning window, Allocation window will be displayed in the top left

corner.

6. Wait until the “Start allocating selected drive(s). It may take several minutes to finish.” message changes to “Storage

Drives have been allocated”. Click OK in the Allocation window to close it.

Time Zone Adjustment

Chapter 1. SRX-Pro Server

XML to PDF by RenderX XEP XSL-FO Formatter, visit us at

http://www.renderx.com/

Содержание SRX PRO





























































































































































































































Результаты поиска

Содержание SRX PRO

Отзывы:

i3 International SRX PRO, Руководство пользователя, Страница: 37 / 220

Результаты поиска

Содержание SRX PRO

Отзывы: