i3 International S81, Руководство пользователя

Страница: 37 / 205

36
SNMP System Configuration Parameters:
Items Description
Mode Indicates the SNMP System mode operation. Possible modes are:
Enabled: Enable SNMP mode operation.
Disabled: Disable SNMP mode operation.
Version Indicates the SNMP supported version. Possible versions are:
SNMP v1: Set SNMP supported version 1.
SNMP v2c: Set SNMP supported version 2c.
SNMP v3: Set SNMP supported version 3.
Read Community Indicates the community read access string to permit access to SNMP agent. The allowed
string length is 0 to 255, and the allowed content is the ASCII characters from 33 to 126.
Write Community Indicates the community write access string to permit access to SNMP agent. The allowed
string length is 0 to 255, and the allowed content is the ASCII characters from 33 to 126.
The field is applicable only when SNMP version is SNMPv1 or SNMPv2c. If SNMP version
is SNMPv3, the community string will be associated with SNMPv3 communities table. It
provides more flexibility to configure security name than a SNMPv1 or SNMPv2c
community string. In addition to community string, a particular range of source addresses
can be used to restrict source subnet.
Engine ID Indicates the SNMPv3 engine ID. The string must contain an even number (in hexadecimal
format) with number of digits between 10 and 64, but all-zeros and all-'F's are not
allowed. Change of the Engine ID will clear all original local users.
SNMP TRAP
This page allows configuration of the SNMP trap.
To configure the SNMP Trap in the web interface:

Click Configuration / Switch / SNMP / TRAP

Set the Mode

Click Add New Entry to open add new SNMP Trap page to create a new trap on the switch.

Set parameters of the trap.

Click Apply and click the Save icon in the upper right corner to save the settings or click Reset to cancel. The
Form will return to the previously saved settings.