i3 International S81, Руководство пользователя

Страница: 114 / 205

113
NOTE: the “Scheduler Mode” is set with “Weighted” then the screen will change as the figure displays.
QoS Ingress Port Schedulers Configuration Parameters:
Items Description
Port The logical port for the settings contained in the same row. Click on the port number in order
to configure the schedulers.
Mode Shows the scheduling mode for this port.
Weight (Qn) Shows the weight for this queue and port.
Scheduler Mode Controls whether the scheduler mode is "Strict Priority" or "Weighted" on this switch port.
Queue Shaper Enable Controls whether the queue shaper is enabled for this queue on this switch port.
Queue Shaper Rate Controls the rate for the queue shaper. The default value is 500. This value is restricted to
100-1000000 when the "Unit" is "kbps", and it is restricted to 1-13200 when the "Unit"
is "Mbps".
Queue Shaper Unit Controls the unit of measure for the queue shaper rate as "kbps" or "Mbps". The default
value is "kbps".
Queue Shaper Excess Controls whether the queue is allowed to use excess bandwidth.
Queue Sheduler Weight Controls the weight for this queue. The default value is "17". This value is restricted to 1-100.
This parameter is only shown if "Scheduler Mode" is set to "Weighted".
Queue Sheduler Percent Shows the weight in percent for this queue. This parameter is only shown if ‘Scheduler Mode’
is set to "Weighted”.
Port Shaper Enable Controls whether the port shaper is enabled for this switch port.
Port Shaper Rate Controls the rate for the port shaper. The default value is 500. This value is restricted to 100 -
1000000 when the Unit is "kbps", and it is restricted to 1-13200 when the "Unit” is "Mbps".
Port Shaper Unit Controls the unit of measure for the port shaper rate as kbps or Mbps. The default value is
kbps.