i3 International S81, Руководство пользователя

Страница: 189 / 205

188
sFLOW Parameters:
Items Description
Owner This field displays the current owner of the sFlow configuration. It assumes one of three values
as follows:
If sFlow is currently not configured/unclaimed, Owner contains <none>.
If sFlow is currently configured through Web or CLI, Owner contains <Configured through local
management>.
If sFlow is currently configured through SNMP, Owner contains a string identifying the sFlow
receiver.
IP Address/Hostname The IP Address or hostname of the sFlow.
Timeout The number of seconds remaining before sampling stops and the current sFlow owner is
released.
Tx Successes The number of UDP datagrams successfully sent to the sFlow receiver.
Flow Samples The total number of flow samples sent to the sFlow receiver.
Counter Samples The total number of counter samples sent to the sFlow receiver.
Port Statistics
Port
The port number for which the following statistics applies.
Rx and Tx Flow
Samples The number of flow samples sent to the sFlow receiver originating from this port. Here flow
samples are divided into RX and TX flow samples where RX flow samples contains the number
of packets that were sampled upon reception (ingress) on the port and TX flow samples
contains the number of packets that were sampled upon transmission (egress) on the port.
Counter Samples The total number of counter samples sent to the sFlow receiver originating from this port.
Buttons
Auto-refresh: Check this box to refresh the page automatically. Automatic refresh occurs every 3
seconds.
Refresh: Click to manually refresh the page.
Clear Receiver: Clears the sFlow receiver counters.
Clear Ports: Clears the per-port counters