i3 International S81, Руководство пользователя

Страница: 29 / 205

28
4. PressApply to apply the change.
Then the disabled VLAN range is removed from the DHCP Server Mode configuration page.
Mode Configure the operation mode per VLAN. Possible modes are:
Enabled: Enable DHCP server per VLAN.
Disabled: Disable DHCP server per VLAN.
DHCP Server Excluded IP
This page configures excluded IP addresses. The DHCP server will not allocate these excluded IP addresses to DHCP
clients.
To configure the DHCP Server Excluded IP in the web interface:

Click Configuration / DHCP / Server/ Excluded IP

Click Add IP Range then create new IP Range on the switch.

Click Apply and click the Save icon in the upper right corner to save the settings or click Reset to cancel. The
Form will return to the previously saved settings.
DHCP Server Excluded IP Parameters:
Items Description
IP Range Define the IP range to be excluded IP addresses. The first excluded IP must be smaller than
or equal to the second excluded IP. BUT, if the IP range contains only 1 excluded IP, then it
can be entered into either one of the first or second excluded IP boxes or both.
DHCP Server Pool
This page manages DHCP pools. According to the DHCP pool, the DCHP server will allocate IP addresses and deliver
configuration parameters to the DHCP client.
To configure DHCP Server Pool in the web interface:

Click Configuration / DHCP / Server / Pool

Click Add New Pool then create a new Pool on the switch.

Click Apply and click the Save icon in the upper right corner to save the settings or click Reset to cancel. The
Form will return to the previously saved settings.