i3 International S81, Руководство пользователя

Страница: 35 / 205

34
Authentication Method Configuration Parameters:
Items Description
Client The management client for which the configuration below applies.
Authentication Method Authentication Method can be set to one of the following values:
none: authentication is disabled and login is not possible.
local: use the local user database on the switch for authentication.
radius: use a remote RADIUS server for authentication.
: use a remote server for authentication.
Methods that involve remote servers are timed out if the remote servers are offline. In this
case the next method is tried. Each method is tried from left to right and continues until a
method either approves or rejects a user. If a remote server is used for primary
authentication it is recommended to configure secondary authentication as 'local'. This will
enable the management client to login via the local user database if none of the configured
authentication servers are alive.
Access Management
This section explains how to configure the access management table of the switch including HTTP/HTTPS, SNMP, and
TELNET/SSH. You can manage the switch over an Ethernet LAN or over the internet.
To configure an Access Management Configuration in the web interface:

Click Configuration / Security / Switch / Access Management

Select “Enabled” in the Mode of Access Management Configuration.

Specify the Start IP Address and the End IP Address.

Select Access management Method (HTTP/HTTPS, SNMP, TELNET/SSH) in the entry.

Click Apply and click the Save icon in the upper right corner to save the settings or click Reset to cancel. The
Form will return to the previously saved settings.