I.A.C.E.R. Srl
17
of wear on head and cable.
Failure in electronic current
generator circuit.
Contact I.A.C.E.R. Srl service
centre.
The device works
properly, but a fall
in treatment
effectiveness is
observed.
Non perfectly efficient
connection on handle/applicator
output circuit.
Carry out prescribed
maintenance. Install and
position unit as described.
Make sure applicator cable and
connector are in good
conditions.
Mechanical damages to the
handle-applicator (following fall
or violent impact), especially to
the electrode, in particular on the
radiating head.
Make sure the radiating head
adheres closely to the part
being treated.
Circuito elettronico del
generatore non perfettamente
tarato.
Contact I.A.C.E.R. Srl service
centre.
Possible fault in unit current
generator circuit.
T
T
E
E
C
C
H
H
N
N
I
I
C
C
A
A
L
L
F
F
E
E
A
A
T
T
U
U
R
R
E
E
S
S
Power supply
230 Vac, 50-60 Hz, ±10%
115 Vac, 50-60 Hz, ±10% *
Max. absorbed power
20 W retire
100 W emission
Power supply by the equipment
120 W
Double protection fuse on power
supply (T):
230 Vac
3,15 A-T - 5 x 20 mm
115 Vac
6,3 A-T - 5 x 20 mm
Peak power
200 Wpk max.
Peak voltage
Capacitive use
300 V max.
Resistive use
105 V max.
Probes supplied
Resistive probe
Capacitive probe
Emission Frequency of the probe
455 kHz
Type of electrodes used
Resistive, made of stainless steel
Capacitive, made of stainless steel
and covered with nylon
Diametro degli elettrodi
Diameter 30 mm
Diameter 50 mm
Adjustable power
0-100%
Working
area
of
the
inserts/electrodes
Diameter 30mm
7.1 cm
2
Diameter 50mm
19.6 cm
2
Adjustable treatment time
Up to 60 minutes
Classification in compliance with the directive 93/42/CEE
II B
Class of isolation / parts applied according to the rule EN
60601-1
I / BF
Temperature
(34-45) °C ± 1°C
Channels output
2 indipendent channels
(1 output channel for capacitive use
and 1 output channel for resistive
use)
LCD display with backlight for display and control of
operating parameters
Grafico colori 320 x 340 pixel
Touch encoder
Protocols in memory
20
Number of protocols that can be saved in the user memory
200
Number of protocols that can be saved in the smart-card
200
Carrello External dimensions (W x H x D)*:
39x28x18 cm
Weight of the device body:
9.5 Kg
Conditions of use
temperature
(+10 - +40) °C
Содержание I-TECH.AR
Страница 1: ...MNPG112 Rev 2 17 05 2013 USER MANUAL...
