I.A.C.E.R. Srl
3
-
The therapeutic suggestions are stored in the permanent memory of the machine. These
protocols can be edited but not possible to save any changes.
-
The protocols of therapeutic suggestion preloaded on the machine cannot be deleted.
-
It is not possible to define a number of sessions suggested to evaluate the effectiveness of
the treatment, since they are related to the power delivered to the patient undergoing
treatment. E 'task of the physician to decide the number of therapy sessions which subject
the patient according to the specific requirements of the case, in order to ensure to the
patient himself the execution of an effective treatment in time and place in conditions of
absolute safety.
-
Always control sometimes the integrity of the cable and of the probe/applicator
connector
:
they must not be damaged or worn.
-
CLASS A device suitable for use in all establishments other than domestic and those
directly connected to the public low-voltage power supply network that supplies buildings
used for domestic purposes.
USE
-
On request we can provide the user manual in electronic form.
-
Because of security reasons, the
only specific software
must be loaded into each machine.
In case of exchange of software, the machine may immediately stop all its functions,
requiring the intervention of I.A.C.E.R. Srl technical assistance.
-
The Smart Card has to be introduced keeping the golden chip facing up.
-
A new Smart-Card has to be initialized using FORMATTING
before being used.
-
If the card is introduced in wrong way or is not formatted or results not correct, a warning
window will appear with the information about the error. Close the window clicking OK to
continue.
-
SMART-CARD option is visible (and therefore selectable) only if the smart-card is properly
inserted in its slot. In case of lacked insertion of the Smart-card in its slot or Improper
insertion, the option button SMART CARD is not visible, for which a possible selection
does not involve any action.
-
The selection of programs to be loaded takes place by default in the user memory, that in
cases of non-presence of the Smart-card (due to its lack or to an improper insertion in its
slot) is the only support of available memory to load customized programs.
MAINTENANCE
-
Use the probes/applicators with care: any misuse may affect their performance and
features.
-
Under no circumstances technicians not authorised by the fabricant are allowed to open
and/or disassemble the probe/applicator: such tampering, besides damaging its
characteristics, immediately invalidate the right to warranty.
-
The equipment should never be disassembled for cleaning or inspection purposes: the
units does not have to be cleaned internally, and if for some reason the unit must be
opened, it should only be done by specialized technicians authorized by the I.A.C.E.R. Srl.
-
Do not use thinners, detergents, acid solutions, aggressive solutions or flammable liquids
to clean the external parts of the unit and accessories. Using these substances, or
misusing the accessories, will cause the immediate voiding of all warranty rights, as well as
irreparably damaging the unit.
-
For optimal use of the apparatus and to ensure its optimum performances it is
recommended to perform properly within the time and in the manner recommended
maintenance actions.
-
For a correct replacement of the installed fuses, observe the following indications:
1.
open the fuse box using a screwdriver, making sure you insert the screwdriver in the
slot on the fuse box and levering up outwards;
2.
remove the fuse holder making it slide along the track;
3.
remove the installed fuses and replace them with new ones;
4.
replace the fuse holder into the fuse box, making it slide along the track;
5.
close the fuse box plastic door.
−
It is recommended to perform periodic maintenance every year, in order to check:
o
the intensity of any leakage currents;
o
the continuity and thus the integrity, of the ground conductor;
o
the correctness of the value of insulation resistance;
in order to ensure the electrical safety of the device, ensure that it is operating in a safe
guaranteed. For this kind of intervention you should contact a qualified service technician
or alternatively I.A.C.E.R. Srl or one of its authorized service centers.
WORKING PROBLEMS
-
Only technicians authorized by the manufacturer may access the interior of the unit.
-
You should contact the fabricant or its authorized service centres for any repair work or
further information.
!
!
W
W
A
A
R
R
N
N
I
I
N
N
G
G
S
S
!
!
PRELIMINARY NOTES
-
The perfect functionality of the device is guaranteed in accordance with the rules of
installation and of use included, only with original accessories and spare parts.
-
If there are problems or installation difficulties, please contact the I.A.C.E.R. Srl technical
assistance department.
-
The correct position while moving the machine: the apparatus has to be moved exclusively
by gripping it with both hands on the curved profiles of the lid.
-
Before connecting the cable to the mains plug, check that the equipment wasn’t damaged
during transport. Ensure that the power supply specifications on the mains socket
correspond with the information on the label attached to the back of the unit.
-
The electric current that powers the unit is VERY DANGEROUS. Before connecting or
disconnecting the power cable from the connecter on the unit, make sure it is plugged out
from the mains socket.
-
The power cable has an earthed plug for safety reasons.
-
Only use with a mains socket suitable for use with earthed systems.
-
The equipment should only be connected to electrical systems that fully comply with
regulations.
-
Se si impiegano prolunghe verificare la presenza e l’integrità del conduttore di protezione
a terra.
-
Connect the equipment directly to the wall socket without using extensions. Failure to
comply with these warnings may result in dangerous electrical discharges that could cause
injury operators and compromise the functioning of the unit.
Содержание I-TECH.AR
Страница 1: ...MNPG112 Rev 2 17 05 2013 USER MANUAL...
