Hyundai HL630VL, Руководство оператора

Страница: 78 / 161

Operation Controls 2-27
1. Left Turn and Hazard Warning Light
This light blinks when left turn signal is turned “ON”. Both
lights blink when warning lights are turned “ON”.
ECO
Fig 37
Fig 38
Fig 39
Fig 40
Fig 41
Fig 42
Fig 43
Fig 44
Note: If vehicle is moved while this light is turned “ON”, it
could cause premature wear or damage the brake.
Always “RELEASE” parking brake and make sure this
light is “OFF” before traveling machine.
2. Right Turn and Hazard Warning Light
This light blinks when right turn signal is turned “ON”. Both
lights blink when warning lights are turned “ON”.
3. Battery Warning Light
When starter switch is first turned to “ON” position, this red
warning light should turn “ON”. When engine is running this
red light should turn “OFF”. If light remains “ON” when engine
is running, alternator is defective.
4. ECO indicator
no used
5. Engine Oil Pressure Warning
This indicator Light will turn “ON” when the engine starter
switch is turned “ON”, and should go “OFF” after the engine
starts. For example, if the engine oil pressure becomes too
low, the light will turn “ON”. If this happens, shut the engine
down immediately and determine the cause of the problem.
If you continue to work when this light is “ON”, it will result in
serious engine damage.
6. Parking Brake Indicator Light
This indicator light will turn “ON”, when the parking brake is
“APPLIED”.
7. High Beam Indicator Light
This indicator light will turn “ON”, when the headlights are
turned to “HIGH BEAM”.
8. Preheat Indicator Light
This indicator light will turn “ON”, when the engine preheat
function is operating. Do not start engine as long as this light
is “ON”.