Hyundai HL630VL Скачать руководство пользователя страница 136 | Manualshive

Страница: 136 / 161

Hyundai HL630VL Скачать руководство пользователя страница 136

Inspection, Maintenance and Adjustment 4-17

Check Tires for damage

Fig 13

Improper maintenance or replacement of Tires may cause
explosion to cause serious injury or death.
The maintenance and replacement of Tires may only be
carried out by trained person who is properly equipped.
For maintenance of Tires, please contact with the nearest
Tires agent or Tires manufacturer.

The overheating of the Tire will cause explosion and serious
injury or death.
Overheated tires may explode causing death or serious injury.
If an overheated tire is suspected, keep away at least 15m (50
ft).
Stay away until tire and rim cools down.

WARNING

WARNING

In case of following situation, you should replace with new Tires
for the sake of safety, and contact with the nearest Tire agent or
manufacturer.

• Tire bead metal wires are broken, damaged or bent, or the

Tire is deformed.

• The wheel carrier is excessively worn, with an exposure of

more than 1/4.

•  The wear of the Tire carrier of the tread exceeds 1/3.
•  The inner tube is separated.
•  When the radius is worn to the wheel carrier.
•  The Tire is deformed or damaged.

«
...
134
135
136
137
138
...
»

Содержание HL630VL


































































































































































Отзывы:

Нет отзывов