Hyundai HL630VL страница 48 Скачать руководство пользователя

Страница: 48 / 161

Safety 1-39

Lifting of loader

1. It is necessary to let the professionals with lifting knowledge

be responsible for the command and operation.

2. You should calculate the crane’s maximum lifting weight

and the sling’s bearing capacity to ensure the lifting safety.
Meanwhile, the 4 hooks on the sling shall bear load evenly.

3. Accomplish the following preparation before lifting:

• Put the shifting manipulating handle on “Neutral Gear”

position, and put the neutral gear locking plate on “Lock-
ing” position.

• Put the arm and bucket to the lowest position.
• Pull up the button of parking brake to apply parking

braking.

•  Switch off the engine and pull out the starter key.
•  Close and lock all doors.
•  Use frame-fixed bumper to fasten the front and rear

frames, making the machine unable to rotate.

4. The sling should be securely fixed to the lifting eyes of the

machine on which the lifting marks are indicated.

Incorrect lifting may cause the offset of the machine, thus
inducing personal injury or death as well as property loss.

WARNING

Содержание HL630VL


































































































































































Результаты поиска

Содержание HL630VL

Отзывы:

Похожие инструкции для HL630VL

Бренды по названию

Популярные бренды

Hyundai HL630VL, Руководство оператора

Результаты поиска

Содержание HL630VL

Отзывы:

Похожие инструкции для HL630VL

Бренды по названию

Популярные бренды