1-18 Safety
Please remember that the earth is very soft in this area after
raining, explosion operation or earthquake.
The soils piled up on the ground or by side of the channels are
very soft which will be collapsed under the vibration of the ma-
chine to cause the machine to tip over.
Please install cab protection device at the places where there is
the danger of stone falling.
Check before starting engine
Perform the inspection each day before starting the engine.
Otherwise, you will have danger of serious injury.
Completely remove all wooden chips, tree leaves, grass, paper
scraps and other combustible substances piled up around the
engine and the batteries. These substances may cause fires.
Remove the dirt from the glass, mirrors, handrails and footsteps.
Do not randomly put the backup tools and components which
should be put in the reserved box in the cab. Otherwise, they
will fall or will be damaged or will break the control handle or
switches due to the vibration when the machine is travelling or
operating. Moreover, there is also the possibility for them to be
stuck in gap of the handle, making the working device in fault
or moving dangerously which can cause the unexpected acci-
dents.
Check the level of coolant, fuel and hydraulic oil, and check air
filter for blocking or the cables for damaging.
Adjust the seat to the position at which the operation is easily
performed. Check the seat belt and fasteners for the damage or
wear.
Check the Instrument position and the mirror angle, and check
the operation lever for the normal position.
Please perform the maintenance immediately if the abnormali-
ties are found during aforementioned inspections.
Содержание HL630VL
