manualshive.com logo in svg

Hyundai Elantra 2018, Руководство пользователя, Страница: 59 / 526

Поделиться
Скачать
Hyundai Elantra 2018 Скачать руководство пользователя страница 59

2-42

Safety system of your vehicle

The side air bags are designed to deploy
only during certain side impact collisions,
depending on the crash severity, angle,
speed and point of impact.
The side and curtain air bags on both
sides of the vehicle may deploy if a
rollover or possible rollover is detected.
The side air bags are not designed to
deploy in all side impact or rollover situa-
tions.

Curtain air bags 

Curtain air bags are located along both
sides of the roof rails above the front and
rear doors.
They are designed to help protect the
heads of the front seat occupants and
the rear outboard seat occupants in cer-
tain side impact collisions.

(Continued)

•

Do not use any accessory seat
covers. This could reduce or pre-
vent the effectiveness of the sys-
tem.

•

Do not place any objects over the
air bag or between the air bag
and yourself. Also, do not attach
any objects around the area the
air bag inflates such as the door,
side door glass, front and rear pil-
lar.

•

Do not place any objects between
the door and the seat. They may
become dangerous projectiles if
the side air bag inflates.

•

Do not install any accessories on
the side or near the side air bags.

•

Do not put any objects between
the side airbag label and seat
cushion. It could cause harm if
the vehicle is in a crash severe
enough to cause the air bags to
deploy.

•

Do not cause impact to the doors
when the ignition switch is in the
ON position or this may cause
the side air bags to inflate.

•

If the seat or seat cover is dam-
aged, have the vehicle checked
and repaired by an authorized
HYUNDAI dealer.

To reduce the risk of serious injury
or death from an inflating side air
bag, take the following precautions:

•

Seat belts must be worn at all
times to help keep occupants
positioned properly.

•

Do not allow passengers to lean
their heads or bodies onto doors,
put their arms on the doors,
stretch their arms out of the win-
dow, or place objects between
the doors and seats.

•

Hold the steering wheel at the 9
o'clock and 3 o'clock positions, to
minimize the risk of injuries to
your hands and arms.

(Continued)

WARNING  

OAD035042

OAD035043

Содержание Elantra 2018















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов