manualshive.com logo in svg

Hyundai Elantra 2018, Руководство пользователя, Страница: 327 / 526

Поделиться
Скачать
Hyundai Elantra 2018 Скачать руководство пользователя страница 327

5-44

Driving your vehicle

When the ECO mode is activated:
• The acceleration response may be

slightly reduced if the accelerator
pedal is depressed moderately.

• The air conditioner performance may

be limited.

• The shift pattern of the automatic

transmission/dual clutch transmission
may change.

• The engine speed may be lower than

when driving in NORMAL mode.

The above situations are normal condi-
tions when the ECO mode is activated to
improve fuel efficiency.

Limitation of the ECO mode opera-
tion:
Even though ECO mode is selected and
there is no change in the ECO indicator :
• When the coolant temperature is low,

ECO mode will be limited until engine
temperature is at normal operating
temperature.

• When driving up a hill, ECO mode will

be limited to provide better power
when driving uphill.

• When driving the vehicle with the auto-

matic transmission/ dual clutch trans-
mission gear shift lever in manual shift
mode, ECO mode will be limited
according to the shift position.

SPORT mode

SPORT mode manages the
driving dynamics by automat-
ically adjusting the steering
effort, and the engine and

transmission control logic for enhanced
driver performance.
• When SPORT mode is selected by

pressing the DRIVE MODE button, the
SPORT indicator will illuminate.

• Whenever the engine is restarted, the

Drive Mode will revert back to NOR-
MAL mode. If SPORT mode is desired,
re-select SPORT mode from the
DRIVE MODE button.

• When SPORT mode is activated:

- The engine rpm will tend to remain

raised over a certain length of time
even after releasing the accelerator

- Upshifts are delayed when accelerat-

ing

Information 

In SPORT mode, the fuel efficiency may
decrease.

i

Содержание Elantra 2018















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов