manualshive.com logo in svg

Hyundai Elantra 2018, Руководство пользователя, Страница: 331 / 526

Поделиться
Скачать
Hyundai Elantra 2018 Скачать руководство пользователя страница 331

5-48

Driving your vehicle

Warning message

• This warning message may appear

when :
- One or both of the sensors on the

rear bumper is blocked by dirt or
snow or a foreign object.

- Driving in rural areas where the BSD

sensor does not detect another vehi-
cle for an extended period of time.

- When there is inclement weather

such as heavy snow or rain.

If any of these conditions occur, the light
on the BSD switch and the system will
turn off automatically.

When the BSD cancelled warning mes-
sage is displayed in the cluster, check to
make sure that the rear bumper is free
from any dirt or snow in the areas where
the sensor is located. Remove any dirt,
snow, or foreign material that could inter-
fere with the radar sensors.
After any dirt or debris is removed, the
BSD system should operate normally
after about 10 minutes of driving the
vehicle.
If the system still does not operate nor-
mally have your vehicle inspected by an
authorized HYUNDAI dealer.

If there is a problem with the BSD sys-
tem, a warning message will appear and
the light on the switch will turn off. The
system will turn off automatically. Have
your vehicle inspected by an authorized
HYUNDAI dealer.

■

Supervision cluster
(Type A)

■

Supervision cluster
(Type B)

OAD055090L/OLF054217N

■

Supervision cluster
(Type A)

■

Supervision cluster
(Type B)

OAD055091L/OTLE055040

Содержание Elantra 2018















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов