Hyundai Elantra 2018 Скачать руководство пользователя страница 121

Страница: 121 / 526

3-44

Convenient features of your vehicle

Resetting the sunroof

Sunroof needs to be reset if the following
occurs :
- Battery is discharged or disconnected

or the related fuse has been replaced
or disconnected

- The one-touch sliding function of the

sunroof does not normally operate

Reset procedure :
1. Place the ignition switch to the ON

position or start the engine. It is rec-
ommended to reset the sunroof while
the engine is running.

2. Push the control lever forward. The

sunroof will close completely or tilt
depending on the condition of the sun-
roof.

3. Release the control lever when the

sunroof stops moving.

4. Push the control lever forward about

10 seconds.
- When the sunroof is in the closed

position :

The glass will tilt and slightly move

up and down.

- When the sunroof is in the tilt posi-

tion:

The glass will slightly move up and

down.

Do not release the lever until the opera-
tion is completed.
If you release the lever during operation,
start the procedure again from step 2.

5. Within 3 seconds, push and hold the

control lever forward until the sunroof
operates as follows:

Tilt down

→

Slide Open

→

Slide

Close.

Do not release the lever until the opera-
tion is completed.

If you release the lever during operation,
start the procedure again from step 2.

6. Release the sunroof control lever after

all steps have completed. (The sun-
roof system has been reset.)

Information

• If the sunroof is not reset when the vehi-

cle battery is disconnected or dis-
charged, or the sunroof fuse is blown,
the sunroof may not operate normally.

• For more detailed information, we rec-

ommend that you contact an authorized
HYUNDAI dealer.

Содержание Elantra 2018















































































































































































































































































































































































































































































































































Результаты поиска

Содержание Elantra 2018

Отзывы:

Похожие инструкции для Elantra 2018

Бренды по названию

Популярные бренды

Hyundai Elantra 2018, Руководство пользователя

Результаты поиска

Содержание Elantra 2018

Отзывы:

Похожие инструкции для Elantra 2018

Бренды по названию

Популярные бренды