manualshive.com logo in svg

Hyundai Elantra 2018, Руководство пользователя, Страница: 153 / 526

Поделиться
Скачать
Hyundai Elantra 2018 Скачать руководство пользователя страница 153

3-76

Convenient features of your vehicle

Low Pressure

This warning message is displayed if the
tire pressure is low. The corresponding
tire on the vehicle will be illuminated.

For more information, refer to "Tire
Pressure Monitoring System (TPMS)"
in chapter 6.

Low Fuel

This warning message is displayed if the
fuel tank is almost out of fuel.
When this message is displayed, the
vehicle range is approximately 30 miles.
When this message is displayed, the low
fuel level warning light in the cluster will
come on.
It is recommended to look for the nearest
fueling station and refuel as soon as pos-
sible.

Engine has overheated

This warning message is displayed when
the engine coolant temperature is above
248°F (120°C). This means that the
engine is overheated and may be dam-
aged.

If your vehicle is overheated, refer to
"Overheating" in chapter 6.

OTL045160L

■

Supervision cluster 

OAD045121N/OAD065023N

■

Supervision cluster
(Type A, C)

■

Supervision cluster
(Type B)

OAD045125L/OAD045126L

■

Supervision cluster
(Type A, C)

■

Supervision cluster 
(Type B)

Содержание Elantra 2018















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов