manualshive.com logo in svg

Hyundai Elantra 2018, Руководство пользователя, Страница: 274 / 526

Поделиться
Скачать
Hyundai Elantra 2018 Скачать руководство пользователя страница 274

4-55

Multimedia System

4

Clock Menu

Press the [SETUP/CLOCK]  button

Select [Clock]

Clock Settings

This menu is used to set the time.
Select [Clock Settings]
Adjust the number currently in focus to
set the [hour] and press the TUNE knob
to set the [minute] and [AM/PM].

Calendar Settings

This menu is used to set the date.
Select [Calendar Settings]
Adjust the number currently in focus to
make the settings and press the TUNE
knob to move to the next setting.

Time Format

This function is used to set the 12/24
hour time format of the audio system.
Select [Time Format] 

Set 12Hr/24Hr.

Clock Display when Power is OFF

Select [Clock Disp.(Pwr Off)]

Set

[On/Off]
• [On] : Displays time/date on screen
• [Off] : Turn off.

Clock Setting Distraction

Adjusting the clock setting while
driving can result in a loss of vehi-
cle control that may lead to an acci-
dent, severe personal injury, and
death.

WARNING

Содержание Elantra 2018















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов