manualshive.com logo in svg

Hyundai Elantra 2018, Руководство пользователя, Страница: 141 / 526

Поделиться
Скачать
Hyundai Elantra 2018 Скачать руководство пользователя страница 141

3-64

Convenient features of your vehicle

Malfunction Indicator
Lamp (MIL)

This warning light illuminates:

• Once you turn the ignition switch or

Engine Start/Stop button to the ON
position.
- It illuminates for approximately 3 sec-

onds and then goes off.

• When there is a malfunction with the

emission control system.
In this case, have your vehicle inspect-
ed by an authorized HYUNDAI dealer.

- Malfunction Indicator Lamp (MIL)
Driving with the Malfunction Indicator
Lamp (MIL) on may cause damage to
the emission control systems which
could affect drivability and/or fuel
economy.

If the Malfunction Indicator Lamp
(MIL) illuminates, potential catalytic
converter damage is possible which
could result in loss of engine power.
In this case, have your vehicle
inspected by an authorized HYUNDAI
dealer.

Charging System
Warning Light

If this warning light comes on while the
engine is running, the battery is not being
charged. Immediately turn off all electri-
cal accessories. Try not  to use electrical-
ly operated controls, such as the power
windows. Keep the engine running; stop-
ping then restarting the engine will quick-
ly discharge the battery.

If there is a malfunction with either
the alternator or electrical charging
system:

1. Drive carefully to the nearest safe

location and stop your vehicle.

2. Turn the engine off and check the

alternator drive belt for looseness or
breakage.
If the belt is adjusted properly, there
may be a problem in the electrical
charging system.
In this case, have your vehicle
inspected by an authorized HYUNDAI
dealer.

Engine Oil Pressure
Warning Light

This warning light illuminates:

• Once you turn the ignition switch or the

Engine Start/Stop button to the ON
position.
- It remains on until the engine is start-

ed.

• When the engine oil pressure is low.

If the engine oil pressure is low:

1. Drive carefully to the nearest safe

location and stop your vehicle.

2. Turn the engine off and check the

engine oil level (For more informa-
tion, refer to "Engine Oil" in chapter
7). If the level is low, add oil as
required.

If the warning light remains on after
adding oil and restarting the engine or
if oil is not available, turn off the
engine. There is a mechanical concern
that needs to be repaired before you
can continue driving. In this case,
have your vehicle inspected by an
authorized HYUNDAI dealer.

NOTICE

NOTICE

NOTICE

Содержание Elantra 2018















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов