manualshive.com logo in svg

Hyundai Elantra 2018, Руководство пользователя, Страница: 142 / 526

Поделиться
Скачать
Hyundai Elantra 2018 Скачать руководство пользователя страница 142

3-65

Con

v

enient f

eatur

es of y

our v

ehicle

3

- Engine Oil Pressure Warning light
To prevent severe engine damage,
after the Engine Oil Pressure Warning
Light is illuminated and as soon as it
is safe to do so, turn the engine off
and check the oil level.
If the oil level is low, fill the engine oil
to the proper level and start the
engine again. If the light stays on with
the engine running, turn the engine off
immediately.
In this case, have your vehicle
inspected by an authorized HYUNDAI
dealer.

Low Fuel Level
Warning Light

This warning light illuminates:

When the fuel tank is nearly empty. Add
fuel as soon as possible.

- Low Fuel Level
Driving with the Low Fuel Level warn-
ing light on or with the fuel level below
"E" can cause the engine to misfire
and damage the catalytic converter.

Low Tire  Pressure
Warning Light 

This warning light illuminates:

• Once you turn the ignition switch or the

Engine Start/Stop button to the ON
position.
- It illuminates for approximately 3 sec-

onds and then goes off.

• When one or more of your tires are sig-

nificantly underinflated (The location of
each underinflated tire is displayed on
the supervision cluster LCD display).

For more information, refer to "Tire
Pressure Monitoring System (TPMS)"
in chapter 6.

NOTICE

NOTICE

Содержание Elantra 2018















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов