Hyundai Elantra 2018 Скачать руководство пользователя страница 367

Страница: 367 / 526

5-84

Driving your vehicle

Lane changing

• A vehicle which moves into your lane

from an adjacent lane cannot be rec-
ognized by the radar until it is in the
radar’s detection range.

• The radar may not detect immediately

when a vehicle cuts in suddenly.
Always pay attention to the traffic, road
and driving conditions.

• If a slower vehicle moves into your

lane, your speed may decrease to
maintain the distance to the vehicle
ahead.

• If a faster vehicle moves into your lane,

your vehicle will accelerate to the set
speed.

Detecting vehicles

Some vehicles in your lane cannot be
recognized by the radar:
- Narrow vehicles such as motorcycles or

bicycles

- Vehicles offset to one side
- Slow-moving vehicles or sudden-decel-

erating vehicles

- Stopped vehicles
- Vehicles with small rear profile such as

trailers with no loads

A vehicle ahead cannot be recognized
correctly by the radar if any of following
occurs:
- When the vehicle is pointing upwards

due to overloading in the trunk

- While the steering wheel is operating
- When driving to one side of the lane
- When driving on narrow lanes or on

curves

Apply the brake or accelerator pedal if
necessary.

ODH053095

ODH053096

Содержание Elantra 2018















































































































































































































































































































































































































































































































































Результаты поиска

Содержание Elantra 2018

Отзывы:

Hyundai Elantra 2018, Руководство пользователя, Страница: 367 / 526

Результаты поиска

Содержание Elantra 2018

Отзывы: