Hyundai Elantra 2018 Скачать руководство пользователя страница 334

Страница: 334 / 526

5-51

Dri
ving y

our v

ehicle

Limitations of the System

The driver must be cautious in the below
situations, because the system may not
detect other vehicles or objects in certain
circumstances.

- The vehicle drives on a curved road or

through a tollgate.

- The sensor is polluted with rain, snow,

mud, etc.

- The rear bumper where the sensor is

located is covered with a foreign object
such as a bumper sticker, a bumper
guard, a bike rack, etc.

- The rear bumper is damaged, or the

sensor is out of the original default posi-
tion.

- The vehicle height gets lower or higher

due to heavy loading in a trunk, abnor-
mal tire pressure, etc.

- The vehicle drives in inclement weather

such as heavy rain or snow.

- There is a fixed object near the vehicle,

such as a guardrail.

- A big vehicle is near such as a bus or

truck.

- A motorcycle or bicycle is near.
- A flat trailer is near.

- If the vehicle has started at the same

time as the vehicle next to you and has
accelerated.

- When the other vehicle passes at a

very fast speed.

- While changing lanes.
- While going down or up a steep road

where the height of the lane is different.

- When the other vehicle approaches

very close.

- When a trailer or carrier is installed.
- When the temperature near the rear

bumper area is high or low.

- When the sensors are blocked by the

other vehicles, walls or parking-lot pil-
lars.

- When the detected vehicle also moves

back, as your vehicle drives back.

- If there are small objects in the detect-

ing area such as a shopping cart or a
baby stroller.

- If there is a low height vehicle such as a

sports car.

- When other vehicles are close to your

vehicle.

- When the vehicle in the next lane

moves two lanes away from you OR
when the vehicle two lanes away moves
to the next lane from you.

- When driving through a narrow road

with many trees or bushes.

- When driving on wet surface.

Information

This device complies with Part 15 of the
FCC rules.
Operation is subject to the following two
conditions:
1. This device may not cause harmful

interference, and

2. This device must accept any interfer-

ence received, including interference
that may cause undesired operation.

Содержание Elantra 2018















































































































































































































































































































































































































































































































































Результаты поиска

Содержание Elantra 2018

Отзывы:

Hyundai Elantra 2018, Руководство пользователя, Страница: 334 / 526

Результаты поиска

Содержание Elantra 2018

Отзывы: